Caja positiva renault master 2.2 dci 4x2 diesel euro 6 nueva
Caja positiva Renault Master 2.2 DCI 4x2 Diesel Euro 6 nueva
Urgente- 17.22 M³
- Caja de cambios manual
- 3 asientos
- Gdańsk
- Garantía 24 meses
Furgonetas Frigorífica
|
Información principal
|
|
|---|---|
|
Garantía material
|
|
| Ref. web : | 10699635 |
| Carrocería | Frigorífica |
| Bajo carrocería | Caja positiva |
| Marca | Renault |
| Gama (marca : Renault) | Master |
| Modelo | 2.2 DCI |
| Estado | Nuevo |
| Fecha 1ª matriculación | -- |
| Garantía material | Si |
| Duración de la garantía | 24 meses |
| País | POLONIA |
| Constructor | Renault |
Características Renault Master |
|
|---|---|
| Ejes | 4x2 |
| País (gama) | POLONIA |
| Kilometraje | 12 km |
| Conducción | Volante a la izquierda |
| Normas Europeas | Renault Euro 6 |
Dimensiones de la caja |
|
|---|---|
| Altura de la caja | 2.0 metros |
| Ancho interior de la caja | 2.05 metros |
| Largo interior de la caja | 4.2 metros |
Dimensiones |
|
|---|---|
| Volumen | 17.22 m³ |
| Superficie | 8.61 m² |
Tonelaje |
|
|---|---|
| PTMA | 3.5 T |
Equipamiento Furgoneta Renault |
|
|---|---|
|
Estado del material |
|
|---|---|
| Energía | Diesel |
Certificación ATP |
|---|
|
Información complementaria Renault 2.2 DCI |
|
|---|---|
| Caja de cambios | Caja de cambios manual |
| Rechazos de CO2 | 347 g/km |
| Número de plazas sentadas | 3 |
| Tipo de grupo de frío | Eléctrico |
Motor |
|
|---|---|
| Potencia | 170 CV |
| Potencia del motor | 125 kW |
| Cilindrada | 1997 cm3 |
Equipamiento cabina |
|---|
|
Comentarios |
|---|
|
Airbag package (FAB02 SABG0 ABCXL)
driver and passenger airbag driver side airbag passenger airbag switch 16" steel with full hubcaps heated front seats fog lights reinforced battery high beam assistant LED cabin lighting - Intermediate frame with bottom binding made of high-strength aluminum profiles, - Body made of sandwich panels, insulated with polyurethane foam, 80 mm walls and 100 mm ceiling - Exterior and interior cladding made of white polyester laminate - Double-leaf rear doors with an opening angle of 270, insulated with foam, equipped with fittings (external tubular lock for each door, 3 hinges for each door) made of acid-resistant steel (grade 1.4301) locked with a key (customs locks with the possibility of installing a seal) - Rear door frame made of acid-resistant steel with a handle - Rear doors and walls protected against damage by a mechanical aluminum fender strip - body frame made of anodized aluminum profiles - number of lighting points in the body depending on the internal length bodywork, switch in the driver's cabin -All materials used have PZH certificates and may be approved for contact with food -Plastic wheel arches with mud flaps mounted above the rear axle wheels -marker lights mounted in accordance with applicable Road Traffic Law regulations -Entrance ladder extending at the rear doors -Insulated floor, 15 mm waterproof plywood, anti-slip screed (lamb) -Rubber bumpers on the rear door frame -Foldable side underrun protection strips (set) Additional equipment: -Roof spoiler + side fairings (white) -Stretch rod mounting strip -Temperature recorder with DR 201 printer -Installation of factory reversing sensors GSR2 -Zanotti Z380 single refrigeration unit power supply -Airbag set with compressor (1 perimeter) -Painted steel frame extension |
|
Ver todo
|
Comentarios |
|---|
|
Airbag package (FAB02 SABG0 ABCXL)
driver and passenger airbag driver side airbag passenger airbag switch 16" steel with full hubcaps heated front seats fog lights reinforced battery high beam assistant LED cabin lighting - Intermediate frame with bottom binding made of high-strength aluminum profiles, - Body made of sandwich panels, insulated with polyurethane foam, 80 mm walls and 100 mm ceiling - Exterior and interior cladding made of white polyester laminate - Double-leaf rear doors with an opening angle of 270, insulated with foam, equipped with fittings (external tubular lock for each door, 3 hinges for each door) made of acid-resistant steel (grade 1.4301) locked with a key (customs locks with the possibility of installing a seal) - Rear door frame made of acid-resistant steel with a handle - Rear doors and walls protected against damage by a mechanical aluminum fender strip - body frame made of anodized aluminum profiles - number of lighting points in the body depending on the internal length bodywork, switch in the driver's cabin -All materials used have PZH certificates and may be approved for contact with food -Plastic wheel arches with mud flaps mounted above the rear axle wheels -marker lights mounted in accordance with applicable Road Traffic Law regulations -Entrance ladder extending at the rear doors -Insulated floor, 15 mm waterproof plywood, anti-slip screed (lamb) -Rubber bumpers on the rear door frame -Foldable side underrun protection strips (set) Additional equipment: -Roof spoiler + side fairings (white) -Stretch rod mounting strip -Temperature recorder with DR 201 printer -Installation of factory reversing sensors GSR2 -Zanotti Z380 single refrigeration unit power supply -Airbag set with compressor (1 perimeter) -Painted steel frame extension |
Tarifa de venta
Furgonetas Frigorífica
|
Información principal
|
|
|---|---|
|
Garantía material
|
|
| Ref. web : | 10699635 |
| Carrocería | Frigorífica |
| Bajo carrocería | Caja positiva |
| Marca | Renault |
| Gama (marca : Renault) | Master |
| Modelo | 2.2 DCI |
| Estado | Nuevo |
| Fecha 1ª matriculación | -- |
| Garantía material | Si |
| Duración de la garantía | 24 meses |
| País | POLONIA |
| Constructor | Renault |
Características Renault Master |
|
|---|---|
| Ejes | 4x2 |
| País (gama) | POLONIA |
| Kilometraje | 12 km |
| Conducción | Volante a la izquierda |
| Normas Europeas | Renault Euro 6 |
Dimensiones de la caja |
|
|---|---|
| Altura de la caja | 2.0 metros |
| Ancho interior de la caja | 2.05 metros |
| Largo interior de la caja | 4.2 metros |
Dimensiones |
|
|---|---|
| Volumen | 17.22 m³ |
| Superficie | 8.61 m² |
Tonelaje |
|
|---|---|
| PTMA | 3.5 T |
Equipamiento Furgoneta Renault |
|
|---|---|
|
Estado del material |
|
|---|---|
| Energía | Diesel |
Certificación ATP |
|---|
|
Información complementaria Renault 2.2 DCI |
|
|---|---|
| Caja de cambios | Caja de cambios manual |
| Rechazos de CO2 | 347 g/km |
| Número de plazas sentadas | 3 |
| Tipo de grupo de frío | Eléctrico |
Motor |
|
|---|---|
| Potencia | 170 CV |
| Potencia del motor | 125 kW |
| Cilindrada | 1997 cm3 |
Equipamiento cabina |
|---|
|
Comentarios |
|---|
|
Airbag package (FAB02 SABG0 ABCXL)
driver and passenger airbag driver side airbag passenger airbag switch 16" steel with full hubcaps heated front seats fog lights reinforced battery high beam assistant LED cabin lighting - Intermediate frame with bottom binding made of high-strength aluminum profiles, - Body made of sandwich panels, insulated with polyurethane foam, 80 mm walls and 100 mm ceiling - Exterior and interior cladding made of white polyester laminate - Double-leaf rear doors with an opening angle of 270, insulated with foam, equipped with fittings (external tubular lock for each door, 3 hinges for each door) made of acid-resistant steel (grade 1.4301) locked with a key (customs locks with the possibility of installing a seal) - Rear door frame made of acid-resistant steel with a handle - Rear doors and walls protected against damage by a mechanical aluminum fender strip - body frame made of anodized aluminum profiles - number of lighting points in the body depending on the internal length bodywork, switch in the driver's cabin -All materials used have PZH certificates and may be approved for contact with food -Plastic wheel arches with mud flaps mounted above the rear axle wheels -marker lights mounted in accordance with applicable Road Traffic Law regulations -Entrance ladder extending at the rear doors -Insulated floor, 15 mm waterproof plywood, anti-slip screed (lamb) -Rubber bumpers on the rear door frame -Foldable side underrun protection strips (set) Additional equipment: -Roof spoiler + side fairings (white) -Stretch rod mounting strip -Temperature recorder with DR 201 printer -Installation of factory reversing sensors GSR2 -Zanotti Z380 single refrigeration unit power supply -Airbag set with compressor (1 perimeter) -Painted steel frame extension |
|
Ver todo
|
Comentarios |
|---|
|
Airbag package (FAB02 SABG0 ABCXL)
driver and passenger airbag driver side airbag passenger airbag switch 16" steel with full hubcaps heated front seats fog lights reinforced battery high beam assistant LED cabin lighting - Intermediate frame with bottom binding made of high-strength aluminum profiles, - Body made of sandwich panels, insulated with polyurethane foam, 80 mm walls and 100 mm ceiling - Exterior and interior cladding made of white polyester laminate - Double-leaf rear doors with an opening angle of 270, insulated with foam, equipped with fittings (external tubular lock for each door, 3 hinges for each door) made of acid-resistant steel (grade 1.4301) locked with a key (customs locks with the possibility of installing a seal) - Rear door frame made of acid-resistant steel with a handle - Rear doors and walls protected against damage by a mechanical aluminum fender strip - body frame made of anodized aluminum profiles - number of lighting points in the body depending on the internal length bodywork, switch in the driver's cabin -All materials used have PZH certificates and may be approved for contact with food -Plastic wheel arches with mud flaps mounted above the rear axle wheels -marker lights mounted in accordance with applicable Road Traffic Law regulations -Entrance ladder extending at the rear doors -Insulated floor, 15 mm waterproof plywood, anti-slip screed (lamb) -Rubber bumpers on the rear door frame -Foldable side underrun protection strips (set) Additional equipment: -Roof spoiler + side fairings (white) -Stretch rod mounting strip -Temperature recorder with DR 201 printer -Installation of factory reversing sensors GSR2 -Zanotti Z380 single refrigeration unit power supply -Airbag set with compressor (1 perimeter) -Painted steel frame extension |
Tarifa de venta
Sr. Ćwir Adam
+48.600.88.99.52
Contactar al vendedor
Adam Ćwir
- Polaco
- Inglés
Sus datos
Registrarse /
Conectarse
Sus datos
Modificar
Teléfono
E-mail
Ubicación
Empresa
Ver todo
Ver menos
Hacer una oferta al vendedor
Adam Ćwir
- Polaco
- Inglés
Sus datos
Registrarse /
Conectarse
Sus datos
Modificar
Teléfono
E-mail
Ubicación
Empresa
Ver todo
Ver menos
Contactar al vendedor Modificar
-
Teléfono
-
E-mail
-
Ubicación
-
Empresa
Ver todo
Ver menos
Consejos de seguridad
Anuncios similares
15
Frigorífica Iveco Daily 35S15 3.0 Diesel Kontener 3x Drzwi Chłodnia Izoterma Therm
P.W. GRIB Grzegorz Baraniak
39
Frigorífica Renault MASTER CHŁODNIA KONTENER -10*C TEMPOMAT LEDY BLIŹNIACZE KOŁA KL
Auto Plus Sokołowscy Spółka Komandytowa
16
Caja negativa Renault Master 130
FURGON24 SP.Z O.O.
9
Frigorífica Iveco Daily 35C15
Owerczuk Automotive Polska
11
Frigorífica Iveco nueva 35S18HA8 3.0
Omega Pilzno ITiS Godawski & Godawski Sp.z o.o
Las otras gamas de Furgonetas Renault
Las otras páginas web del grupo
Chile-Camiones.com :
Compraventa de camión de ocasión
Chile-Mop.com :
Compraventa de material OP de ocasión
Chile-Furgonetas.com :
Compraventa de furgoneta de ocasión
Chile-Manutencion.com :
Compraventa de material de manutención de ocasión
Chile-Agricola.com :
Compraventa de material agrícola de ocasión